Latest products unboxing for office and outdoors. Tests of 3d printer and PC.
Welcome
Login

How to Vacuum A Swimming Pool Step by Step Featuring Leslie's 14" Pro Grade Vacuum Head

Thanks! Share it with your friends!

URL

You disliked this video. Thanks for the feedback!

Sorry, only registred users can create playlists.
URL


Added by shub in Outdoors equipments
134 Views

Description

Manually vacuuming your swimming pool and spa with a manual vacuum head and pool hose sounds like something very simple and easy to do. Simply attach the vacuum head and hose and you are good. But it can be a little more complex than that. I will be going over some do’s and don’ts in this article for you so that you can avoid making some typical mistakes.

Let me lay out some of the most critical don’ts so that you won’t damage your pool or equipment. When you submerge the vacuum head and pool hose make sure all the air is out of the hose. This can be achieved by using a hand-over-hand motion and pushing the hose down into the water. You want to connect the hose to the skimmer suction line without any air in the hose.

The next thing you never want to do is place the vacuum head directly over a main drain cover. What could happen is that the suction from the pump along with the vacuum head attached to the top of the drain cover could cause it to get stuck on top of it. If you try to pull it off the drain cover, you could crack the plastic around the screwed-down area and inadvertently break the cover off. This will turn into a very expensive repair so if you accidentally set the vacuum head on top of the main drain cover, do not try to pull it up and off. Instead, turn off the pump and then move the vacuum head off the main drain.

Using a cheap hose and vacuum head can also contribute to vacuuming frustration. A cheap hose will cavitate due to the pump’s powerful suction which will cause the pump to lose prime. You will know this is happening when you see the walls of the pool hose twisting and collapsing in on itself when it is attached to the pool skimmer. If this is happening, I suggest upgrading to a professional quality pool hose like a Smooth Bor brand or another professional hose.

If your vacuum head is constantly getting stuck on the pool bottom it could be that you are using an old or cheap vacuum head. A professional quality vacuum head is designed not to get stuck on the pool surface and is a worthwhile investment.

To purchase the vacuum head in this video: https://lesliespool.com/pro-grade-vacuum-head/70173.html

The best way to vacuum the pool is to follow these steps:

1. If the pool is off turn it on. Make sure all the suction is directed at the skimmer which means turning off the main drain if possible.

2. Skim the pool surface at least two times around the entire pool and attached spa. Any leaves that fall to the bottom during skimming can be vacuumed up.


3. Submerge the vacuum hose and vacuum head and evacuate all the air from the hose.

4. Use an in-line leaf canister for best results and connect the canister and pool hose to the suction line (usually the back hole in a two-hole skimmer or directly to the skimmer hole if there is just one hole).

5. Vacuum the pool in an easy-to-follow backward and forward motion, like when you vacuum your carpet or floor in your house. If you have good suction and a good vacuum head, you should be able to vacuum up the sides of the wall and steps. Try to vacuum the walls as high up as you can.

6. If there is an attached spa you can quickly lift the vacuum head out of the pool in a swift motion and drop it down into the spa. The pump will lose suction briefly so wait about 30 seconds before you continue to vacuum.

7. When done remove the hose from the skimmer and replace the basket and lid.

8. Use a pool brush to brush down the walls and step areas to remove any streaks of dirt that you may have missed. The pool will have a very uniform clean look to it now.

Here are some things to also note before you vacuum out your pool. If the pool has a large amount of leaves or larger debris, manually vacuuming out the pool may be difficult.

If the pool pump is running poorly or if the pool filter is very dirty, vacuuming the pool will be very difficult. You will have very little suction or no suction at all. Clean the filter and get the pump running correctly before attempting to manually vacuum the pool.

Visit my Website: http://www.swimmingpoollearning.com/
eBook: https://www.swimmingpoollearning.com/swimming-pool-care-ebook
YouTube Video Index: http://poolmandave.blogspot.com/2014/03/swimming-pool-tips-reviews-how-to-video.html – A list of all of my videos.
Blogger: http://poolmandave.blogspot.com/
Facebook: https://www.facebook.com/swimmingpoollearning/
https://poolguycoaching.com/Twitter: https://twitter.com/Mrdgvb1
Join me on Patreon: https://www.patreon.com/poolguycoaching
Podcast: http://www.buzzsprout.com/110832
Podcast Website: https://www.thepoolguypodcastshow.com/
Coaching Site: https://poolguycoaching.com/
Shop at Leslie's: Leslie’s Pool Supplies has been do-it-yourselfers and pool trade professionals trusted partner since 1963, providing quality products and services to make pool care easy and solutions and expertise to do it right. http://lesliespool.com/?utm_medium=referral&utm_source=spll&utm_campaign=spll

Commenting disabled.
RSS