Cartridge Pool Filter Cleaning Step by Step Video Guide

Cleaning a cartridge filter is a pretty straightforward process. Each is a little different but the general principle is the same. Below are some links to the tools shown in the video.

Turn off the pool equipment: Before starting the cleaning process, turn off the pool pump to ensure safety and avoid any accidents. Make sure the pool is not going to turn on and if you are unsure just turn off the breaker to the pool pump.

Release pressure: If your pool filter system has a pressure relief valve, use it to release the pressure inside the filter. You can also simply relieve the pressure by removing the drain plug on the bottom of the filter. I suggest this method as it will also drain the water from the tank.

Open the filter: Depending on your specific pool filter model, remove the locking mechanism or unscrew the top of the filter housing to access the cartridges inside. For the quad-type filters, there is a clamp held on by a Spring Barrel Nut.

Remove the cartridges: Carefully remove the cartridge elements from the filter housing. Take note of their orientation so that you can put them back in the same position later. Most cartridges will be marked with the word “Top” on the top.

Rinse off loose debris: Use a garden hose with a high-pressure nozzle to rinse off loose debris and dirt from the cartridges. Direct the water from top to bottom and make sure you get the pleats completely clean.

Inspect the cartridges: Take a close look at the cartridges to ensure there are no tears, holes, or damage. If you find any significant damage, it's best to replace the cartridges.

Reassemble the filter: Once the cartridges are clean and dry, carefully place them back into the filter housing, making sure they are correctly oriented as they were before.

Close the filter: Securely fasten the filter housing, ensuring there are no leaks. Apply silicone lube to the o-ring to extend the life of the o-ring and to prevent leaks.

Turn on the pool equipment and open the air relief valve: Once everything is reassembled and secured, turn on the pool pump and check for any leaks or abnormal pressure readings. You want to open the air bleeder/ air relief valve to remove any air from the tank.

I suggest cleaning single cartridge filters every 30 days and the quad-type 4 cartridge set up every 4-6 months.

Blaster Silicone Spray:
https://bit.ly/476Ttu2

Orbits Nozzle:
https://amzn.to/3rLTXWo

Multi-Tork Filter Socket Tools:
https://multi-tork.com/

Cyclone Tool:
https://cyclonefiltertools.com/

Visit my Website: http://www.swimmingpoollearning.com/
eBook: https://www.swimmingpoollearning.com/swimming-pool-care-ebook
YouTube Video Index: http://poolmandave.blogspot.com/2014/03/swimming-pool-tips-reviews-how-to-video.html – A list of all of my videos.
Blogger: http://poolmandave.blogspot.com/
Facebook: https://www.facebook.com/swimmingpoollearning/
https://poolguycoaching.com/Twitter: https://twitter.com/Mrdgvb1
Join me on Patreon: https://www.patreon.com/poolguycoaching
Podcast: http://www.buzzsprout.com/110832
Podcast Website: https://www.thepoolguypodcastshow.com/
Coaching Site: https://poolguycoaching.com/
Shop at Leslie's: Leslie’s Pool Supplies has been a do-it-yourselfer and pool trade professionals' trusted partner since 1963, providing quality products and services to make pool care easy and solutions and expertise to do it right. http://lesliespool.com/?utm_medium=referral&utm_source=spll&utm_campaign=spll