3D printing
-
15:19 Popular
BIGGER!! - 3D PRINTED TANK #5
Added 501 Views / 0 LikesThis week I completed the final version of the chassis and tested one of the treads with one of the motors. This thing is going to fly!! I know that the first half of the video is slightly out of focus but let's consider that the least troublesome issue..
-
13:41 Popular
IT MOVES!! - 3D PRINTED TANK #6
Added 606 Views / 0 LikesThis week I managed to make a quick test of the tank so I can keep improving it. Progressss!!!!It seems that I accidentally deleted the clip where I thank all my Patreon supporters and it is too late to go and record it again. Thanks to you all!!!All the
-
18:38
NARROWER & STRONGER - 3D PRINTED TANK #7
Added 435 Views / 0 LikesAfter a zillion comments telling me this thing is too wide, I reduced its width by 100mm and as I was doing that I decided to reinforce the supports for the suspension and a whole lot of other improvements that will add to the greatness of the finished pr
-
15:09
PERFORMANCE TEST - 3D PRINTED TANK #8
Added 479 Views / 0 LikesI brought the tank to the field and gave it a good run. I'm very surprised about the full speed of this thing which has its own issues... but I've learned a lot.The onboard camera stopped working as soon as the tank started moving. Will never buy cheap ba
-
12:25 Popular
3D PRINTED AIR CANNON
Added 554 Views / 0 LikesThis week I've made a 3D printed air cannon, which of course will be the cannon that we'll mount on the tank. This is just the proof of concept, there are still a few parts missing, like the ball feeder so when we hit fire, we have the certainty that a ki
-
15:45
STRONGER! TALLER! - 3D PRINTED TANK #9
Added 477 Views / 0 LikesThis week I modified the tank with three main purposes. First, make it stronger, with new suspension sets which withstand my own weight each, and a new configuration that will make the treads find obstacles before the chassis, the chances of this survivin
-
16:23
ROBOTIC PLATFORM REBORN
Added 484 Views / 0 LikesThis week I recovered an old an unfinished project, the SDR. You may still not know what is it for, but it is going to be cool!! In this episode I reassemble the robot with every part redesigned from scratch to give this thing the width it deserves. The s
-
17:08 Popular
WIRING THE ROBOTIC PLATFORM
Added 504 Views / 0 LikesI've completed the wiring and all the moving parts of this platform so it is ready now for the test. Still need a lot of programming but I won't make you go through me programming it. If you want to help this channel you can do it here:Patreon support: ww
-
12:09
BIGGER!! (WAIT WHAT??) - 3D PRINTED TANK #10
Added 466 Views / 0 LikesThe chassis is complete for the nth time, slightly longer for obvious reasons, all the suspensions and small idlers are in, and this thing looks awesome! If you want to help this channel you can do it here:Patreon support: www.patreon.com/ivanmirandaOne t
-
06:52
SAND DRAWING ROBOT
Added 493 Views / 0 LikesI finally did a test of the sand drawing robot, it worked beautifully. First time. At last ya'll had an opportunity of seeing what this project was all about and I hope you like it. Thanks again to my friends that helped my recording this test! If you wan
-
16:13 Popular
POWER TRAIN - 3D PRINTED TANK #11
Added 562 Views / 0 LikesThis week I swapped the ESC for a VESC and upgraded the battery for a much more powerful and fast tank. Not all was smooth but this upgrade takes what this tank can do to a new level. The test of this thing is going to be incredible!If you want to help th
-
02:49 Popular
2018 TRAILER
Added 551 Views / 0 LikesI do a lot of things, and not all of them work as intended, but when they do, it is really fun!! Please Subscribe!!
-
15:08
COLOURED BALL WORLD SPEED RECORD (Unofficial)
Added 499 Views / 0 LikesThis week I made a few improvements to the cannon design, mostly following your recommendations, and it worked beautifully. I also managed to overcome a newbie mistake that I did last time soldering the motor connectors which has helped with the power A L
-
16:01
FIELD TEST³ - 3D PRINTED TANK #12
Added 490 Views / 0 LikesThis week I completed the chassis of the tank with the two treads on and everything. The weight of the tank as it is is 23kg therefore me jumping backwards when I saw it coming fast. I made a few easily fixable mistakes, but the most significant one is th
-
12:20 Popular
FROM IDEA TO 3D PRINTABLE MODEL
Added 537 Views / 0 LikesI made this video just to give you a peek on my process where I go form an idea to a 3D printable model. This is not a Fusion360 tutorial but an example of a project where I would need to model an idea to be 3D printed where the idea has been substituted
-
11:34 Popular
RIDING A 3D PRINTED TANK #13
Added 601 Views / 0 LikesIf you want to see me ride my 3D printed tank, this is your video. I had lot's of fun testing the tank at full power and it looks that this thing could handle even more, I didn't dare to press full throttle when I was on top of it because I had no helmet